Juniper MX2020 - Prepare the Site for Installation; Rack-Mounting Requirements

Understanding Trio Layer 2 Feature Parity | 30
Alarm and Display Components | 31
MX2020 Craft Interface Description | 31
MX2020 Alarm Relay Contacts on the Craft Interface | 33
MX2020 Alarm LEDs and Alarm Cutoff/Lamp Test Button | 34
Cable and Rack Management | 37
MX2020 Cable Management Description | 37
Standard Cable Management System | 37
Extended Cable Management System | 40
MX2020 Rack-Mounting Hardware | 42
Cooling System Components and Descriptions | 45
MX2020 Cooling System Description | 45
MX2020 Fan Tray LED | 48
Host Subsystem Components | 49
MX2000 Host Subsystem CB-RE Description | 49
RE-MX2000-1800x4 CB-RE Description | 50
RE-MX2000-1800x4 CB-RE Front Panel | 51
RE-MX2000-1800x4 CB-RE Components | 52
RE-MX2000-1800x4 CB-RE Software | 53
RE-MX2000-1800x4 CB-RE Boot Sequence | 53
REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Description | 54
REMX2K-X8-64G CB-RE Components | 54
REMX2K-X8-64G and REMX2K-X8-64G-LT CB-RE Boot Sequence | 56
CB-RE LEDs | 56
REMX2K-X8-128G CB-RE Description | 60
REMX2K-X8-128G CB-RE Components | 60
REMX2K-X8-128G CB-RE LEDs | 62
REMX2K-X8-128G CB-RE Boot Sequence | 63
MX2000 Switch Fabric Board (SFB) Overview | 63
iv