Juniper MX2020 Hardware Guide

5. Pull the PSM straight out of the chassis.
WARNING: To avoid damage, do not touch the power connectors in back of
the PSM.
6. Place the PSM module into an antistatic bag.
NOTE: Each PSM slot not occupied by a DC PSM must be covered by a PSM blank panel.
Figure 200: Removing an MX2000 Router DC Power Supply Module (240 V China)
8
6
g100409
SEE ALSO
409

Juniper MX2020 Specifications

General

Brand	Juniper
Model	MX2020
Category	Network Router
Language	English