Juniper MX2020 - Page 447

AC input: OK (INP0 feed expected, INP0 feed connected)
Capacity: 2100 W (maximum 2100 W)
DC output: 260.00 W (Upper Zone, 5.00 A at 52.00 V, 12.38% of capacity)
PSM 16:
State: Online
AC input: OK (INP0 feed expected, INP0 feed connected)
Capacity: 2100 W (maximum 2100 W)
DC output: 273.00 W (Upper Zone, 5.25 A at 52.00 V, 13.00% of capacity)
PSM 17:
State: Online
AC input: OK (INP0 feed expected, INP0 feed connected)
Capacity: 2100 W (maximum 2100 W)
DC output: 271.69 W (Upper Zone, 5.25 A at 51.75 V, 12.94% of capacity)
System:
Upper Zone:
Capacity: 18900 W (maximum 18900 W)
Allocated power: 7360 W (11540 W remaining)
Actual usage: 2466.06 W
Lower Zone:
Capacity: 18900 W (maximum 18900 W)
Allocated power: 7360 W (11540 W remaining)
Actual usage: 2260.69 W
Total system capacity: 37800 W (maximum 37800 W)
Total remaining power: 23080 W
The output displays the DC chassis power for 2100 W capacity.
NOTE: The capacity of the DC PSM is limited by the power feeds as indicated by the 60 A/80 A
switch on the PDM.
user@host> show chassis power
PSM 0:
State: Empty
Input: Absent
427