Juniper MX2020 - Page 452

PSM 15:
State: Online
DC input: OK (INP1 feed expected, INP1 feed connected)
Capacity: 2100 W (maximum 2500 W)
DC output: 269.06 W (Upper Zone, 5.25 A at 51.25 V, 12.81% of capacity)
PSM 16:
State: Online
DC input: OK (INP1 feed expected, INP1 feed connected)
Capacity: 2100 W (maximum 2500 W)
DC output: 269.06 W (Upper Zone, 5.25 A at 51.25 V, 12.81% of capacity)
PSM 17:
State: Online
DC input: OK (INP1 feed expected, INP1 feed connected)
Capacity: 2100 W (maximum 2500 W)
DC output: 281.88 W (Upper Zone, 5.50 A at 51.25 V, 13.42% of capacity)
System:
Upper Zone:
Capacity: 10500 W (maximum 12500 W)
Allocated power: 7760 W (2740 W remaining)
Actual usage: 1370.94 W
Lower Zone:
Capacity: 8400 W (maximum 10000 W)
Allocated power: 7760 W (640 W remaining)
Actual usage: 1345.31 W
Total system capacity: 18900 W (maximum 22500 W)
Total remaining power: 3380 W
For further description of the output from the commands, see the Junos OS System Basics and Services
Command Reference.
RELATED DOCUMENTATION
MX2020 Power Subsystem Description | 91
Prevention of Electrostatic Discharge Damage | 770
Troubleshooting the MX2000 Router Power System | 686
432