Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 136
Advanced
The Advanced tab contains settings to configure material characteristics, camera gain, and dynamic
exposure.
To configure advanced settings:
1. Go to the Scan page.
2. Switch to Video mode.
Using Video mode while configuring the settings lets you evaluate their impact.
3. Expand the Sensor panel by clicking on the panel header or the button.
4. If you are configuring a dual- or multi-sensor system, click the button corresponding to the sensor you
want to configure.
The button is labeled Top, Bottom, Top-Left, or Top-Right, depending on the system.
Settings can be configured separately for each sensor.
5. Click on the Advanced tab.
6. Configure material characteristics, camera gain, or dynamic exposure.
For more information, see Material on the next page and Camera Gain and Dynamic Exposure on the
next page.
To Next Page
Loading...
Need help?
General
