LMI Technologies Gocator 2100 Series - Boundingbox; Ellipse

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 497
BoundingBox
Element Type Description
ZAngle 64f Z rotation to apply to bounding box (degrees).
AsymmetryDetectionType 32s
Determine whether to use asymmetry detection and, if enabled,
which dimension is the basis of detection. The possible values are:
0 – None
1 – Length
2 - Width
Acceptance/Width/Min 64f Minimum width (mm).
Acceptance/Width/Max 64f Maximum width (mm).
Acceptance/Width/Tolerance 64f Width acceptance tolerance value
Acceptance/Width/Tolerance.dep
recated
Bool Whether this tolerance field is deprecated
Acceptance/Length/Min 64f Minimum length (mm).
Acceptance/Length/Max 64f Maximum length (mm).
Acceptance/Length/Tolerance 64f Length acceptance tolerance value
Acceptance/Length/Tolerance.de
precated
Bool Whether this tolerance field is deprecated
X 64f X value
X.deprecated Bool Whether this X field is deprecated
Y 64f Y value
Y.deprecated Bool Whether this Y field is deprecated
Width 64f Width value
Width.deprecated Bool Whether this width field is deprecated
Length 64f Length value
Length.deprecated Bool Whether this length field is deprecated
BoundingBox Child Elements
Ellipse
Element Type Description
ZAngle 64f Z rotation to apply to ellipse (degrees).
AsymmetryDetectionType 32s
Determine whether to use asymmetry detection and, if enabled,
which dimension is the basis of detection. The possible values are:
0 – None
1 – Major
2 - Minor
Acceptance/Major/Min 64f Minimum major length (mm).
Ellipse Child Elements