Gocator Line Profile Sensors: User Manual
Tools and Native Drivers • 709
Example:
Info
CSV Version,Sensor Count,Trigger Mode,...
2,1,0,32000.00000,...
End
DeviceInfo
ID,Model,Version,...
13434,311320-2M-01,4.8.2.29,...
End
Ranges
...
End
Usually all available data in the recording buffer is exported. The exceptions are Surface and
SurfacePointCloud. For these sections, only the currently selected frame is exported.
Info
This section contains basic system information. It has one header row and one value row. The fields are
described below:
Field Description
CSV Version Version of the CSV file format.
Sensor Count Number of sensors in the system.
Trigger Mode
Trigger source:
0 – Time
1 – Encoder
2 – Digital input
3 – Software
Trigger Rate Frame rate for time trigger (Hz).
Trigger Delay Domain
Output delay domain:
0 – Time (µs)
1 – Encoder (mm)
Trigger Delay Output delay (µs or mm, depending on delay domain defined above).
Operation Mode The scan mode.
XResolution System X resolution (mm).
YResolution System Y resolution (mm).
ZResolution System Z resolution (mm).
Yspeed Y Speed (mm/s).
Layout
Sensor orientation:
Info Fields
To Next Page
Loading...
Need help?
General
