Gocator Line Profile Sensors: User Manual
Gocator Emulator • 459
To download a support file:
1. Go to the Manage page and click on the Support category.
2. In Filename, type the name you want to use for the support file.
When you create a scenario from a support file in the emulator, the filename you provide here is displayed
in the emulator's scenario list.
Support files end with the .gs extension, but you do not need to type the extension in Filename.
3. (Optional) In Description, type a description of the support file.
When you create a scenario from a support file in the emulator, the description is displayed below the
emulator's scenario list.
4. Click Download, and then when prompted, click Save.
Downloading a support file stops the sensor.
Running the Emulator
The emulator is contained in the Gocator tools package (14405-x.x.x.x_SOFTWARE_GO_Tools.zip). To
get the package, go to http://lmi3d.com/support, choose your product from the Product Downloads
section, and download the package from the Download Center.
To run the emulator, unzip the package and double-click the GoEmulator link in the unzipped emulator
folder.
To Next Page
Loading...
Need help?
General
