LMI Technologies Gocator 2100 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 484
Element Type Description
EncoderCalibrateEnabled Bool Enables encoder resolution calibration.
Disk Section
See Disk below.
Bar Section
See Bar below.
Plate Section
See Plate below.
Polygon Section
See Polygon on the next page.
Disk
Element Type Description
Diameter 64f Disk diameter (mm).
Height 64f Disk height (mm).
Disk Child Elements
Bar
Element Type Description
Width 64f Bar width (mm).
Height 64f Bar height (mm).
HoleCount 32u Number of holes.
HoleCount.value 32u
Actual number of holes expected by system.
HoleCount.used Bool
Whether the hole count with be used in the bar alignment proceudure.
HoleDistance 64f Distance between holes (mm).
HoleDistance.used Bool Whether the hole distance will be used in the bar alignment procedure.
HoleDiameter 64f Diameter of holes (mm).
HoleDiameter.used Bool Whether the hold diameter will be used in the bar alignment procedure.
DegreesOfFreedom 32s
Degrees of freedom (DOF) to align:
42 – 3 DOF: x, z, y angle
58 – 4 DOF: x, y, z, y angle
59 – 5 DOF: x, y, z, y angle, z angle
Bar Child Elements
Plate
Element Type Description
Height 64f Plate height (mm).
HoleCount 32u Number of holes.
RefHoleDiameter 64f Diameter of reference hole (mm).
SecHoleDiameter 64f Diameter of secondary hole(s) (mm).
Plate Child Elements

LMI Technologies Gocator 2100 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2100 Series
Category	Accessories
Language	English