LMI Technologies Gocator 2100 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 511
Element Type Description
the profile points are used in the bridge value calculation.
MaxInvalid
64f
The maximum percentage of invalid points.
NormalizeEnabled
Boolean Whether tilt normalization is enabled.
MaxDifferential
64f
Maximum differential between the lowest and highest
profile points (mm).
MaxDifferential.min 64f Maximum differential limit min (mm).
MaxDifferential.max 64f Maximum differential limit max (mm).
Measurements\BridgeValue Bridge Value tool
measurement
Bridge Value measurement.
Measurements\Angle Bridge Value tool
measurement
Angle measurement.
Element Type Description
@id 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
0 – Disable
1 – Enable
PreserveInvalidsEnabled Boolean Preserve invalid measurements enable state
0 – Disable
1 – Enable
SmoothingWindow 32u Smoothing window.
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
DecisionMin 64f Minimum decision threshold.
DecisionMax 64f Maximum decision threshold.
BridgeValue Tool Measurement
ProfileCircle
A ProfileCircle element defines settings for a profile circle tool and one or more of its measurements.

LMI Technologies Gocator 2100 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2100 Series
Category	Accessories
Language	English