Gocator Line Profile Sensors: User Manual
79
Gocator Web Interface
The following sections describe the Gocator web interface.
Browser Compatibility
LMI recommends Chrome, Firefox, or Edge for use with the Gocator web interface.
Internet Explorer 11 is supported with limitations; for more information, see below.
Internet Explorer 11 Issues
If you use Gocator with large datasets on Internet Explorer 11, you may encounter the following issues.
Internet Explorer Switches to Software Rendering
If the PC connected to a Gocator sensor is busy, Internet Explorer may switch to software rendering
after a specific amount of time. If this occurs, data is not displayed in the data viewer, and the only
reliable way to recover from the situation is to restart the browser.
It is possible to remove the time limit that causes this issue, but you must modify the computer’s
registry. To do so, follow Microsoft's instructions at https://support.microsoft.com/en-
us/help/3099259/update-to-add-a-setting-to-disable-500-msec-time-limit-for-webgl-frame.
Internet Explorer Displays "Out of Memory"
In some situations, you may encounter “Out of Memory” errors in the Gocator web interface. This issue
can be resolved by checking two options in Internet Explorer.
To correct out of memory issues in Internet Explorer 11:
1. In upper right corner, click the settings icon ( ), and choose Internet options.
2. In the dialog that opens, click the Advanced tab, and scroll down to the Security section.
To Next Page
Loading...
Need help?
General
