LMI Technologies Gocator 2100 Series User Manual

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 568
Part models contain the following subcomponents. You can access the subcomponents using path
notation, for example,"productionRun01.job/myModel.mdl/config.xml".
Element Type Description
Configuration config.xml Model configuration XML. It is always present. (See
Configuration on the
next page.)
Edge Points edge-height-
top
Edge points for the top heightmap. (See
Edge Points below
.)
Edge Points edge-height-
bottom
Edge points for the bottom heightmap.
Edge Points edge-
intensity-top
Edge points for the top intensity map.
Edge Points edge-
intensity-
bottom
Edge points for the bottom intensity map.
Part Model Child Elements
The edge points file exists only when the model contains the source data for the edge points.
Edge Points
Field Type Offset Description
id 16s 0
Sender ID
-1 – Part matching
source 8s 2
Source
0 – Model
1 – Target
imageType 8s 3
Image type
0 – Height map
1 – Intensity map
imageSource 8s 4
Image source
0 – Top
1 – Bottom
width 32u 5 Width of model space, in units of xScale
length 32u 9 Length of model space, un units of yScale
xScale 32u 13 X scale (nm)
yScale 32u 17 Y scale (nm)
xOffset 32s 21 X offset (µm)
yOffset 32s 25 Y offset µm
zAngle 32s 29 Z rotation (microdegrees)
Edge Points Data

LMI Technologies Gocator 2100 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2100 Series
Category	Accessories
Language	English