Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 238
Measurement Illustration
Standard Deviation
Returns the standard deviation of the data points with
respect to the fitted circle.
Min Error
Max Error
The minimum and maximum error among the data points
with respect to the fitted circle.
Min Error X
Min Error Z
The X and Z position of the minimum error.
Max Error X
Max Error Z
The X and Z position of the maximum error.
Type Description
Center Point The center point of the fitted circle.
Features
For more information on geometric features, see Geometric Features on page 206.
Parameter Description
Source The sensor, or combination of sensors, that provides data
for the tool's measurements. For more information, see
Source on page 201.
Stream The data that the tool will apply measurements to.
In Surface mode, this setting is only displayed when a
section is defined on the surface data.
For more information on sections, see Sections on page 190.
Region The region to which the tool's measurements will apply. For
more information, see Regions on page 201.
Filters The filters that are applied to measurement values before
they are output. For more information, see Filters on page
209.
Decision The Max and Min settings define the range that determines
whether the measurement tool sends a pass or fail decision
to the output. For more information, see Decisions on page
208.
Parameters
To Next Page
Loading...
Need help?
General
