Gocator Line Profile Sensors: User Manual
Gocator Acceleration • 454
7. (Optional) If you are accelerating multiple systems, click on another sensor in the Sensors list, and repeat
the steps above.
The application uses Base Port as an offset for several communication port numbers.
To avoid port conflicts, you should increment the base port number by at least 10 for each accelerated
sensor.
Port 3190 is the default base port number, allowing connections from SDK-based applications and the web
UI without manually specifying ports.
8. Click Start.
The sensor system is now accelerated. An icon appears next to the accelerated sensor in the Sensors list to
indicate this.
9. To open the accelerated sensor's web interface, in the Gocator Accelerator application, click the link next to
URL.
When a sensor is accelerated, a "rocket"icon appears in the metrics area.
If you restart an accelerated sensor, the sensor will continue to be accelerated when it restarts.
To stop an accelerated sensor in the Gocator Accelerator application:
1. Select the sensor in the Sensors list.
2. Click Stop.
To exit the Gocator Accelerator application:
1. Right-click the icon Gocator Accelerator icon ( ) in the notification tray.
To Next Page
Loading...
Need help?
General
