Gocator Line Profile Sensors: User Manual
Gocator Emulator • 469
Element Description
Namefield Used to provide a job name when saving files.
Jobs list Displays the jobs that are currently saved in the emulator.
Save button
Saves current settings to the job using the name in the Name field. Changes to job files are not
persistent in the emulator. To keep changes, first save changes in the job file, and then download the
job file to a client computer. See the procedures below for instructions.
Load button Loads the job that is selected in the job list. Reloading the current job discards any unsaved changes.
Delete button Deletes the job that is selected in the job list.
Set as Default
button
Setting a different job as the default is not persistent in the emulator. The job set as default when the
support file (used to create a virtual sensor)was downloaded is used as the default whenever the
emulator is started.
Download...
button
Downloads the selected job to the client computer.
Upload...
button
Uploads a job from the client computer.
Unsaved jobs are indicated by "[unsaved]".
Changes to job files in the emulator are not persistent (they are lost when you close or restart
the emulator). However, you can keep modified jobs by first saving them and then downloading
them to a client computer.
To Next Page
Loading...
Need help?
General
