LMI Technologies Gocator 2100 Series User Manual

Gocator Line Profile Sensors: User Manual
How Gocator Works • 71
geometric features (for example, creating a line from two point geometric features). You can then
perform measurements on those features directly in the tool or in other Feature measurement tools.
You can also use angle measurements on the newly created features for anchoring.
You enable geometric feature output on a tool’s Features tab:
Center Point geometric feature of a Surface Hole tool enabled on Features tab
You enable geometric feature inputs on a Feature tool’s Parameters tab:

LMI Technologies Gocator 2100 Series Specifications

General

Brand	LMI Technologies
Model	Gocator 2100 Series
Category	Accessories
Language	English