OPERATION
29. At the drawbar, c onnect the tow-bar harness plug (A)
to the receptacle on the windrower.
Figure 4.47: Towing Harness
30. At the LH float spring tower, attach connector (A) on
windrower harness to towing harness receptacle (B).
Figure 4.48: Towing Harness
31. Confirm that the flashing amber and signal lights on
header function properly.
32. Before moving the machine, double check that all pins
are secure, the drawbar and hitching components
are not showing signs of damage, and that all safety
equipment is installed and fully functional.
Converting f
rom Transport M ode to Field Operation
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Stop engine and remove key from ignition.
169890
1
11
Revision A
To Next Page
Loading...
