Document Revision 1 Electra Elite IPK II
2 - 66 Program 11 : System Numbering
Description
Use Program 11-16 : Single Digit Service Code Setup to customize the one-digit
Service Codes used when a busy or ring back signal is heard. You can customize
additional Service Codes in Programs 11-10 through 11-15.
The following chart shows:
J
The number of each code (01~11).
J
The function of the Service Code.
J
The type of telephones that can use the Service Code.
J
The default entry. For example, dialing 1 (code 03) when calling an extension will
switch the call from either a voice or signal call (depending on how it is currently
defined).
J
Programs that may be affected by changing these codes.
If you change a Service Code, be sure to record your entry in the “New” column.
Program 11 : System Numbering
11-16 : Single Digit Service Code Setup
Level:
IN
Input Data
Item
No.
Item Default New
Related
Program
01
Step Call
2 11-12-07
02
Barge In
No Setting 11-12-08
03
Switching of Voice/Signal Call
1 11-12-06
04
Intercom Off-Hook Signaling
,
11-12-03
05
Camp-On
# 11-12-04
06
DND/Call Forward Override Bypass
No Setting 11-12-01
07
Message Waiting
0 11-12-09
08
Voice Over
6 11-12-41
09
Access to Voice Mail
7 11-12-51
10
(Department) STG All Ring Mode
No Setting 11-12-09
16-01-05
11
Station Park Hold
No Setting 11-12-35
To Next Page
Loading...
