NEC ELECTRA ELITE IPK II - Gain Table for ARS;F-Route Access

Document Revision 1 Electra Elite IPK II
2 - 402 Program 44 : ARS/F-Route Setup
Description
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the gain/PAD table. If
an extension dials ARS/F-Route number:
J The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
J The Extension Dial Gain Table follows “Outgoing transmit” and “Outgoing receive”
settings.
If the incoming call is transferred to another line using ARS/F-Route”
J The Tandem Gain Table is activated, which is assigned in Program 44-05.
J The Tandem Gain Table follows the “Incoming transmit” and “Incoming receive”
settings for incoming line, and “Outgoing transmit” and “Outgoing receive” settings
for the outgoing line.
 For ARS/F-Route calls, the CODEC gains defined in Program 14-01-02 and 14-01-03
are not activated.
Program 44 : ARS/F-Route Setup
44-07 : Gain Table for ARS/F-Route Access
Level:
IN
Input Data
Gain Table Number 1~500
Item
No.
Item Input Data Default
01
Incoming Transmit
1~63
(-15.5 ~ +15.5dB)
32
02
Incoming Receive
1~63
(-15.5 ~ +15.5dB)
32
03
Outgoing Transmit
1~63
(-15.5 ~ +15.5dB)
32
04
Outgoing Receive
1~63
(-15.5 ~ +15.5dB)
32