NEC ELECTRA ELITE IPK II - Class of Service Options (Incoming Call Service)

Document Revision 1 Electra Elite IPK II
2 - 164 Program 20 : System Option Setup
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define
the incoming call feature availability for each extension Class of Service (COS).
Program 20 : System Option Setup
20-09 : Class of Service Options (Incoming Call Service)
Level:
IN
Input Data
Class of Service Number 01~15
Item
No.
Item
Input
Data
Default
Related
Program
COS
01~14
COS
15
01
Second Call for DID/ DISA/ DIL/ E&M
Override
Turns off or on the extension’s ability to receive
a second call from a DID, DISA, DIL, or tie line
caller.
 With this option set to ‘1’, the destination
extension must be busy in order for a
second DNIS caller to ring through. If the
destination extension does not have a
trunk or CAP key available for the second
call and a previous call is ringing the
extension but has not yet been answered,
the second caller will hear busy regardless
of this program’s setting.
0 = Off
1 = On
11
02
Caller ID Display
Turns off or on the Caller ID display at an
extension.
0 = Off
1 = On
0 0 15-02-08
03
Sub Address Identification
Defines whether an extension displays the
Caller Sub-Address.
0 = Off
1 = On
00
04
Notification for Incoming Call List Existence
Determines whether an extension display shows
“Check List” when an incoming call is missed by
a user.
0 = Off
1 = On
0 0 20-09-02