Document Revision 1 Electra Elite IPK II
2 - 252 Program 23 : Answer Features Setup
Description
Use Program 23-03 : Universal Answer/Auto Answer to assign trunk routes (set in
Program 14-06) to extensions for Universal Answer. If the call ringing the paging
system is in an extension’s assigned route, the user can dial the Universal Answer
code (#0) to pick up the call.
You can also use this program to let an extension user automatically answer trunk
calls that ring other extensions (not their own). When the user lifts the handset, they
automatically answer the ringing calls based on Trunk Group Routing programming
(defined in Program 14-06). The extension user’s own ringing calls, however, always
have priority over calls ringing other co-worker’s extensions. Refer to the Line
Preference feature in the Electra Elite Electra Elite IPK II Features and Specifications
Manual for more information.
Make one entry for each Night Service mode.
Program 23 : Answer Features Setup
23-03 : Universal Answer/Auto Answer
Level:
IN
Input Data
Extension Number Maximum 8 digits
Item
No.
Day/Night
Mode
Route Table
Number
Default Description
Related
Program
01 1~8 0~100 0
Use this program to let an extension
user automatically answer trunk calls
that ring other extensions. When the
user lifts the handset, they automatically
answer the ringing calls based on Trunk
Group Routing programming (defined in
Program 14-06).
14-06
To Next Page
Loading...
