NEC ELECTRA ELITE IPK II - Wireless DECT Measurement

Document Revision 1 Electra Elite IPK II
2 - 510 Program 83 : Hardware Setup for IPK II Wireless
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Program 83-12 : Wireless DECT Measurement to define the Wireless DECT Base
Station measurement.
Conditions
None
Feature Cross Reference
J Wireless-DECT
Program 83 : Hardware Setup for IPK II Wireless
83-12 : Wireless DECT Measurement
Level:
MF
Input Data
Item
No.
Item
Input
Data
Default
01
DECT Measurement
This program measures the length of cables connecting the PCB
and Base Stations so that the system can find the best signal
transmitting timing for handover. Enter Program 83-12-01, press 1
then HOLD. The system will then restart all Base Stations/RFPs
(this takes 3-5 minutes) and then they will use the best timing
possible. This program should be used any time the Base Station
configuration is changed (adding or deleting Base Stations or
changing connecting cables).
0~9 No
Setting