NEC ELECTRA ELITE IPK II - Programming Password Setup

Document Revision 1 Electra Elite IPK II
2 - 538 Program 90 : Maintenance Program
Description
Use Program 90-02 : Programming Password Setup to set the system passwords. For
password entry purposes, the system allows eight users to be defined. Each user can
have a:
J Unique alphanumeric name (up to 10 alphanumeric characters long)
J Password entry of up to 8 digits (using 0~9, # and , )
J Password level
The “IN” level password is used by the “System Installer” for system programming
purposes. The “SA” or “SB” level password cannot access the “IN” level programs.
The reverse type (white on black) just beneath the Description heading is the
program’s access level. You can only use the program if your access level meets or
exceeds the level the program requires. (“SA” level password can access to “SA” or
“SB” programs, and “SB” level password can access to “SB” programs only.)
Program 90 : Maintenance Program
90-02 : Programming Password Setup
Level:
IN
CAUTION
Before changing your numbering plan, use the PC Programming or Web Programming to make
a backup copy of your system’s data.
Input Data
User Number 1~8
Item
No.
Item Input Data
01
User Name
Maximum 10 characters
02
Password
Up to 8 digits
03
User Level
0 = Prohibited User
1 = MF (Manufacturer Level)
2 = IN (Installer Level)
3 = SA (System Administrator Level 1)
4 = SB (System Administrator Level 2)