NEC ELECTRA ELITE IPK II - Program 20: System Option Setup; System Options

Electra Elite IPK II Programming Manual 2 - 149
Program
20
Description
Use Program 20-01 : System Options to set various system options.
Program 20 : System Option Setup
20-01 : System Options
Level:
IN
Input Data
Item
No.
Item Input Data Default Description
Related
Program
01
Operator Access
Mode
0=Step
1 = Circular
0
Use this program to set up priority of
a call when calling an operator
telephone.
20-17
02
Text Message Mode
0 = Call mode
1=No Answer/
Busy mode
1
Use this program to select the mode
when calling the telephone which set
up the text message.
11-11-14
15-07-08
03
--- Not Used ---
04
Network BLF
Interval
0~64800 in 100
ms increments
0
Used to determine how often the
system updates the DSS key BLF
indications.
For Networking, the entry should be
“30”.
30-05
05
DTMF Receive
Active Time
0~64800 seconds 10
For OPXs, analog telephones and
certain analog trunks (like DISA), the
system attaches a DTMF receiver to
the port for this interval. The system
releases the receiver after the
interval expires.
25-07-01
06
Alarm Duration
0~64800 seconds 30
This interval sets the duration of the
alarm signal.
07
Callback Ring
Duration Time
0~64800 seconds 15
Callback rings an extension for this
interval.
11-12-05
15-07-35
08
Trunk Queuing
Callback Time
0~64800 seconds 15
Trunk Queuing callback rings an
extension for this interval.
11-12-05
15-07-35
09
Callback/Trunk
Queuing Cancel
Time
0~64800 seconds 64800
The system cancels an extension’s
Callback or Trunk Queueing request
after this interval.
11-12-05
15-07-35
10
Trunk Guard Timer
0~64800 seconds 1
12
Web Logout Time
1~86400 seconds 900
The system automatically logs out a
Web Pro session after inactivity
lasting this interval.