NEC ELECTRA ELITE IPK II - Service Code Setup (for Service Access)

Document Revision 1 Electra Elite IPK II
2 - 56 Program 11 : System Numbering
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional Service
Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:
J The number of each code (01~59).
J The function of the Service Code.
J The type of telephones that can use the Service Code.
J The default entry. For example, dialing 705 (code 05) will cancel a previously set
Camp-On.
J Programs that may be affected with the changing the code.
 If you change a Service Code, be sure to record your entry in the “New” column.
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level:
IN
Input Data
Item
No.
Item Terminals Default New
Related
Program
01
Bypass Call
Activating Call Forwarding/Do Not
Disturb Override. This code is only
available if you disable the voice mail
Single Digit dialing code in Program
11-16-09.
MLT, SLT 707 11-16-09
02
Conference
MLT, SLT #1
03
Override (Off-Hook Signaling)
MLT, SLT 709
04
Set Camp-On
MLT, SLT 750
05
Cancel Camp-On
MLT, SLT 770
06
Switching of Voice Call and Signal
Call
MLT, SLT 712
07
Step Call
MLT, SLT 708
08
Barge-In
MLT, SLT 710