NEC ELECTRA ELITE IPK II - DID Trunk Group to Translation Table Assignment

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 245
Description
Use Program 22-13 : DID Trunk Group to Translation Table Assignment to assign the
DID Trunk Groups to DID Translation Tables. DID trunks should be in their own group.
If you have more than one type of DID trunk, put each type in a separate Trunk Group.
For each Trunk Group, you make a Translation Table entry for each Night Service
mode.
Conditions
None
Feature Cross Reference
J Direct Inward Dialing (DID)
Program 22 : Incoming Call Setup
22-13 : DID Trunk Group to Translation Table Assignment
Level:
IN
Input Data
Trunk Group Number 1~100
Item
No.
Day/Night Mode
Conversion Table
Area Number
Default
01 1~8 0~20
(0 = No Setting)
1