NEC ELECTRA ELITE IPK II - Program 47: In-Mail; IPK II In-Mail System Options

Electra Elite IPK II Programming Manual 2 - 411
Program
47
Description
Use Program 47-01 : IPK II In-Mail System Options to set up the IPK II In-Mail
system-wide options.
Program 47 : In-Mail
47-01 : IPK II In-Mail System Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
DSPDB Voice Mail Type
(DSPDB VM Type)
Use this option to enable the IPK II
In-Mail. Enter 0 for this option when IPK II
In-Mail is installed.
The KSU must be reset for a change to
this program to take effect.
0=In-Mail
1=VRS
1 (VRS)
02
IPK II In-Mail Master Name
(MasterName)
Use this option to modify the name for all
IPK II In-Mail ports. The system briefly
displays this name when a display
multiline terminal user calls a Voice Mail
port (either by pressing Message, their
voice mail key, or by dialing the master
number). You should always end the
name with the ## characters. The system
substitutes the port number for the last #.
Using the default name
In-Mail ## for
example, the keyset display shows IPK II
In-Mail #1 when calling port 1.
Up to 12 characters
In-Mail ##
(The system
substitutes the port
number for the #
when calling the
port).