NEC ELECTRA ELITE IPK II - Master Call Routing Mailbox Options

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 425
Description
Use 47-04: Master Call Routing Mailbox Options to set up a Master Mailbox (01~16)
assigned as a Call Routing Mailbox in
47-03-03: Master Mailbox Type.
Program 47 : In-Mail
47-04 : Master Call Routing Mailbox Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Dial Action Table
(Dial Action Table)
Use this option to assign the Dial Action Table to
the Call Routing Mailbox. The Dial Action Table
defines the dialing options for the call Routing
Mailbox.
1~16
(Dial Action Table
1~16)
1 (Dial Action Table 1)
02
Screened Transfer Timeout
(Scrn Trf Timeout)
Use this option to set how long a Screened
Transfer (TRF) from the Automated Attendant
will ring an unanswered extension before
recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling]
Options: Delay Rings Before Redirect Transfer in
IPK II In-Mail.
0~255 seconds
Entering 0 causes
immediate recall.
15 (sec)
03
Time Limit for Dialing Commands
(Dialing Timeout)
This option determines how long IPK II In-Mail
will wait for an Automated Attendant caller to dial
before routing the call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout
action programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a
Timeout action programmed, the caller routes to
that destination.
When the associated Dial Action Table does not
have a Timeout action programmed, the
Instruction Menu repeats 3 times and then IPK II
In-Mail hangs up.
0~99 seconds
Entering 0 causes
the Automated
Attendant to
immediately route
callers to the
Timeout destination
programmed in the
active Dial Action
Table.
5 (sec)