NEC ELECTRA ELITE IPK II - Program 45: Voice Mail Integration; Voice Mail Integration Options

Electra Elite IPK II Programming Manual 2 - 409
Program
45
Description
Use Program 45-01 :Voice Mail Integration Options to customize certain voice
mail integration options.
Program 45 : Voice Mail Integration
45-01 : Voice Mail Integration Options
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Voice Mail Department Group Number
Assign which Extension (Department) Group
number is to be assigned as the voice mail
group (non-networked system).
0~64
0 = No Voice Mail
0
02
Voice Mail Master Name
Enter the Voice Mail master name
(non-networked system).
Up to 12 Characters Voice Mail
03
--- Not Used ---
04
Park and Page
Enable/disable the system’s ability to process
the Voice Mail’s Park and Page (
, ) commands.
You should normally enable this option.
0 = Off
1 = On
1
05
Message Wait
Enable/disable the system’s ability to process
the Voice Mail’s Message Wait (#) commands.
You should normally enable this option. If
enabled, be sure that the programmed
Message Notification strings don’t contain the
code for trunk access.
0 = Off
1 = On
1
06
Record Alert Tone Interval Time
This timer sets the interval between voice Mail
Conversation Record alerts
0~64800 (sec) 30
14
CCIS Centralized Voice Mail Number
Assign the pilot number to Centralized Voice
Mail over CCIS Link. This is only assigned in
the remote switches.
Dial (up to 8 digits) No Setting