NEC ELECTRA ELITE IPK II - Hotel Mode One-Digit Service Codes

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 391
Description
Use Program 42-04 : Hotel Mode One-Digit Service Codes to set up the Hotel Mode
one-digit service codes which are assigned in 42-02-01. For each Department Calling
Group (1~64), you enter the destination for each single digit code (1-9, 0,
, ., #). The
destination can be any code up to four digits long, such as an extension number or
access code.
Conditions
H The 1-digit codes you assign in this program wait until the interdigit timer expires
before executing.
Feature Cross Reference
J Hotel/Motel
Program 42 : Hotel Setup
42-04 : Hotel Mode One-Digit Service Codes
Level:
IN
Input Data
Department (Extension) Group Number 01~64
Item
No.
Received
Dial
Destination
Number
Default
01 1~9,0,
, ,# Up to 8 digits No Setting