NEC ELECTRA ELITE IPK II - ISDN BRI Setup

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 15
Description
J Use Program 10-06 : ISDN - BRI Setup to configure the ISDN - BRI’s Terminal
Endpoint Identifier (TEI), mode of operation, and Service Profile Identifier
(SPID) number for each circuit’s B-Channels.
Conditions
None
Feature Cross Reference
J ISDN Compatibility
Program 10 : System Configuration Setup
10-06 : ISDN BRI Setup
Level:
IN
Input Data
ISDN - BRI Circuit 1 ~ 4
Item
No.
Item Input Data Default
01
TEI Selection
Selects the method the
system will use when
assigning Terminal
Endpoint Identifier (TEI)
values to BRI ports.
0 = Select by SPID number
1 = Route by Redirecting Number
0
02
DID Mode
0 = Route by Called Party Number
1 = Route by Redirecting Number
0
03
SPID 1
Dial up to 20 digits
04
SPID 2
Dial up to 20 digits