NEC ELECTRA ELITE IPK II - CPUII Network Setup

Document Revision 1 Electra Elite IPK II
2 - 18 Program 10 : System Configuration Setup
Description
Use Program 10-12 : CPUII Network Setup to setup the IP Address, Subnet-Mask,
and Default Gateway addresses.
Caution! If any of the IPK Address or NIC settings are changed, the system
must be reset in order for the changes to take affect.
Program 10 : System Configuration Setup
10-12 : CPUII Network Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Conditions
01 IP Address
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
172.16.0.10
02 Subnet Mask
128.0.0.0
240.0.0.0
254.0.0.0
255.192.0.0
255.252.0.0
255.255.128.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.254.0.0
255.255.192.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
224.0.0.0
252.0.0.0
255.128.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
255.255.0.0
The setting of
Subnet-Mask is
invalid when all Host
Address are 0.
If the network
section is:
0,
127
128.0
191.255
192.0.0
223.255.255
The setting of
Subnet-Mask is
invalid.
03 Default Gate-
way
1.0.0.1 ~ 126.255.255.254
128.1.0.1 ~ 191.254.255.254
192.0.1.1 ~ 223.255.254.254
0.0.0.0
IP Address for
Router.