NEC ELECTRA ELITE IPK II - Incoming Virtual Extension Ring Tone Order Setup

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 131
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set
the priority (1-4) for the Virtual Extension Ring Tones set in Program 15-08. When
Virtual Extension calls ring an extension simultaneously, the tone with the highest
order number (e.g., 1) rings. The other keys just flash. There are 256 Virtual
Extension ports.
Default
H By default, Virtual Extension ring tones have the following order.
Program 15 : Extension, Basic Setup
15-10 : Incoming Virtual Extension Ring Tone Order Setup
Level:
SA
Input Data
Extension Number Up to 8 digits
Item
No.
Order Data Description
Related
Program
01 1~4
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
In the case of that two or more
virtual extensions are set on a
function key on the keyset, and
the tone pattern by which the
sound of each extension differs,
the priority of ring sound is set up.
15-08
Order
Ring Tone
(Set in Program 15-08)
10
21
32
43