NEC ELECTRA ELITE IPK II - System Options for Caller ID

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 187
Description
Use Program 20-19 : System Options for Caller ID to define the system options for
the Caller ID feature.
Conditions
None
Feature Cross Reference
J Caller ID
Program 20 : System Option Setup
20-19 : System Options for Caller ID
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Caller ID Displaying Format
(if displaying digits are more than 12 digits)
0=First 10
digits
(Upper)
1 = Last 10
digits
(Lower)
0
02
Caller ID Wait Timer
When an incoming CO call is received, the system starts
the timer. It will wait the programmed time for Caller ID
information from telco before connecting the CO call.
0~30 seconds
5
03
Caller ID Edit Mode
If Caller ID Edit Mode is disabled (0), no trunk access code
will be added to the Caller ID. If this option is enabled (1),
the trunk access code entered in Program 10-02-05 will be
added to the beginning of the Caller ID.
0=Off
1=On
0
04
Wait Facility IE Timer
This timer is used with ISDN trunks to determine how long
the system will wait for the Caller ID name from the Telco.
0~64800 seconds
10
05
Caller ID Sender Queing Time (Sender Wait)
0~64800 seconds
0