NEC ELECTRA ELITE IPK II - System Reset

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 545
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-08 : System Reset is used to perform a system reset.
Conditions
H After restoring a customer database, the system must be reset using Program 90-
08 or by powering down/powering up before all the restored programming will
take affect.
Feature Cross Reference
None
Program 90 : Maintenance Program
90-08 : System Reset
Level:
IN
Input Data
Item
No.
Item Input Data
01
System Reset
Dial 1 + press HOLD (Press HOLD key to cancel)