NEC ELECTRA ELITE IPK II - Service Code Setup (for System Administrator)

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 49
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the
Service Codes for the System Administrator. You can customize additional Service
Codes in Programs 11-11 ~ 11-16. The following chart shows:
J The number of each code (01~27).
J The function of the Service Code.
J The type of telephones that can use the Service Code.
J The default entry. For example, dialing (item 26) allows users to force a trunk line to
disconnect.
Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
Level:
IN
Input Data
Item
No.
Item Terminals Default
Related
Program
01
Night Mode Switching
MLT, SLT 718 12-xx
20-07-01
02
--- Not Used ---
03
Setting the System Time
MLT 728
04
Storing Common Speed Dialing
Numbers
MLT 753
05
Storing Group Speed Dialing
Numbers
MLT 754
06
Setting the Automatic Transfer for
Each Trunk Line
MLT 733 24-04-01
07
Canceling the Automatic Transfer
for Each Trunk Line
MLT 734 24-04-01
08
Setting the Destination for
Automatic Trunk Transfer
MLT 735 24-04-01
09
--- Not Used ---
10
--- Not Used ---
11
--- Not Used ---
12
Night Mode Switching for Other
Group
MLT 618 12-xx
20-07-01