NEC ELECTRA ELITE IPK II - Add; Delete Digit for E&M Tie Line

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 331
Description
Use Program 34-06 : Add / Delete Digit for E&M Tie Line to set digits that the
system should add or delete for Tie Lines.
J Delete Digit
Some Tie Line networks pass the location number and extension number to the
remote side. This program allows the system to ignore such numbers for a call.
If individual extensions do not want to receive an incoming call, you could delete all
of the digits including the extension number.
J Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the
digits for the location can be added to the received digits.
Conditions
None
Feature Cross Reference
J Tie Lines
Program 34 : Tie Line Setup
34-06 : Add / Delete Digit for E&M Tie Line
Level:
IN
Input Data
Incoming Trunk Group Number 001~100
Item
No.
Item Input Data Default
01
Delete Digit
0~255
(255 = delete all digits)
0
02
Additional Dial Digits
Up to 4 digits No Setting