NEC ELECTRA ELITE IPK II - VRS Delay Announcement

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 373
Description
Use Program 41-11 : VRS Delay Announcement to assign the VRS message number to
be used as the message source for the 1st and 2nd Delay Announcement Messages.
Turn to Program 41-08 for more on setting up the ACD overflow options.
This program is activated when the delay announcement source and options are
assigned as VRS in Program 41-08.
Program 41 : ACD Setup
41-11 : VRS Delay Announcement
Level:
SA
Input Data
ACD Group No. 01~64
Item
No.
Item Input Data Default
01
Delay Message Start Timer
0~64800 (sec) 0
02
1st Delay Message Number
0~49
0 = No Message
49 = Fixed Message
0
03
1st Delay Message Sending Count
0~255 0
04
2nd Delay Message Number
0~49
0 = No Message
49 = Fixed Message
0
05
2nd Waiting Message Sending Count
0~255 0
06
Tone Kind at Message Interval
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0
07
ACD Forced Disconnect Time After the
After 2nd Delay Message
0~64800 (sec) 60
08
Queue Depth Announcement
(Requires VRS)
0 = Disable
1 = After 1st (1st)
2 = After 2nd (2nd)
3 = After 1st and 2nd
(1st and 2nd)
0