NEC ELECTRA ELITE IPK II - DSS Console Extension Assignment

Document Revision 1 Electra Elite IPK II
2 - 296 Program 30 : DSS/DLS Console Setup
Description
Use Program 30-02 : DSS Console Extension Assignment to identify which
extensions have DSS Consoles connected.
J Up to 32 different extensions with DSS Consoles can be set up. A single extension
can have up to four 60-button DSS Consoles (32 is the maximum allowed per
system).
When programming, each extension/DSS Console(s) combination is called a Console
Number. There are 32 Console Numbers (1~32). Console Numbers can be assigned
to extensions. When entering data, the assignment for Console Number 1 is normally
made first.
Conditions
None
Feature Cross Reference
J Direct Station Selection (DSS) Console
Program 30 : DSS/DLS Console Setup
30-02 : DSS Console Extension Assignment
Level:
IN
Input Data
60-button DSS Console Number 01~32
Item
No.
Item Description Default
01
Extension Number
The extension number for the multiline terminal
connected with the DSS console (up to 8 digits)
No
Setting