NEC ELECTRA ELITE IPK II - VRS;DISA Error Message Assignment

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 269
Description
Use Program 25-05 : VRS/DISA Error Message Assignment to assign the VRS
message number to be used as the Automated Attendant error message. For each
VRS/DISA trunk that the VRS will answer, enter the VRS message (1~48) the outside
caller hears if they dial incorrectly. If you enter “0” (i.e., no error message), the call
reroutes according to Program 25-03 and 25-04.
For each trunk, you make a separate entry for each Night Service mode.
Conditions
None
Feature Cross Reference
J Direct Inward System Access (DISA)
Program 25 : DID/DISA Setup
25-05 : VRS/DISA Error Message Assignment
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Day/Night
Mode
VRS Message Number Default
01 1~8 0~48 (0 = No Setting) 0