NEC ELECTRA ELITE IPK II - Load Data

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 541
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Program 90-04 : Load Data to load the system data from the inserted Compact
Flash Memory to the SRAM and Flash ROM in the system.
Conditions
H After uploading the programming, reset the system and wait a few minutes for the
system to reset completely before accessing any lines or special system features.
Otherwise, some unusual LED indications may be experienced.
Feature Cross Reference
None
Program 90 : Maintenance Program
90-04 : Load Data
Level:
SA
Input Data
Item
No.
Item Input Data
01
Load Data
Dial 1+ press HOLD (Press HOLD to cancel.)