NEC ELECTRA ELITE IPK II - Speed Dial Trunk Group

Document Revision 1 Electra Elite IPK II
2 - 84 Program 13 : Speed Dialing
Description
Use Program 13-05 : Speed Dialing Trunk Group to define the trunk group to be
seized for each Speed Dialing number.
If this program has an entry of ‘0’ (no setting), then seizing a line follows the trunk
access group routing of the caller’s extension (refer to Program 14-06). This setting is
only available in External Speed Dialing Mode (Program 13-01-01).
Default
H No Setting
Conditions
None
Feature Cross Reference
J Speed Dial - System/Group/Station
Program 13 : Speed Dialing
13-05 : Speed Dial Trunk Group
Level:
SB
Input Data
Speed Dialing Bin Number 0~1999
Item No. Trunk Group Number
01 0~100