NEC ELECTRA ELITE IPK II - ANI;DNIS Service Options

Document Revision 1 Electra Elite IPK II
2 - 334 Program 34 : Tie Line Setup
Description
Use Program 34-09 : ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Program 34 : Tie Line Setup
34-09 : ANI/DNIS Service Options
Level:
IN
Input Data
Class of Service 01~15
Item
No.
Name Input Data
Default
Related
Program
COS 01~14 COS 15
01
Receive Format
Use this option to specify the format of the
ANI/DNIS data received from the telco. Make
sure your entry is compatible with the service
the telco provides. (The character
, indicates
a delimiter.)
0=Address
1=
, ANI ,
2= , DNIS ,
3= , ANI , Address ,
4 = , ANI , DNIS ,
5 = , DNIS , ANI ,
( , = Delimiter Code)
0 0 34-09-02
02
Delimiter Dial Code
This option defines the character Telco uses
as a delimiter (see entries 1~5 in Item 1
above). Valid entries are 0~9, #, and , .
1~9, 0, , , # ,, 34-09-01
03
Route Setup of Receive Dial
This option specifies the source of the data
the system uses to route incoming ANI/DNIS
calls. If option ‘2’ is selected, refer to Program
34-09-04.
0 = Fixed Route
(Item08) (No Routing)
1 = Routes on Received
DNIS or Address Data
2 = Routes on Received
ANI Data
0 0 22-09-01
22-11-01
34-09-04
34-09-08