NEC ELECTRA ELITE IPK II - Trunk Group Routing for E&M Tie Lines

Document Revision 1 Electra Elite IPK II
2 - 328 Program 34 : Tie Line Setup
Description
Use Program 34-03 : Trunk Group Routing for E&M Tie Lines to assign the trunk
group route 1~8 or 1~100) chosen when a user seizes a Tie Line and dials 9. (Set
Trunk Group Routing in Program 14-07.) If the system has Automatic Route
Selection, dialing 9 accesses ARS. Make a separate entry for each Tie Line - for
each Night Service Mode.
Conditions
None
Feature Cross Reference
J Tie Lines
Program 34 : Tie Line Setup
34-03 : Trunk Group Routing for E&M Tie Lines
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Day/Night
Mode
Route Table
Number
Default
01 1~8 0~100
(0 = Setting)
1