NEC ELECTRA ELITE IPK II - In-DHCP Server Setup

Document Revision 1 Electra Elite IPK II
2 - 20 Program 10 : System Configuration Setup
Description
Use Program 10-13 : In-DHCP Server Setup to setup the DHCP Server built into the
CPUII.
Caution! The system must be reset in order for these changes to take affect.
Conditions
None
Feature Cross Reference
J Voice Over Internet Protocol (VoIP)
Program 10 : System Configuration Setup
10-13 : In-DHCP Server Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
DHCP Server
Mode
0: Disable
1: Enable
0
Enable or disable the use of the
built-in DHCP Server.
02
Lease Time
Days 0~255 0 day
Lease Time of the IP address to a
client.
Hour 0~23 0 hour
Note: Pressing the Transfer Key
will increment to the next setting
data.
Minutes 1~59 30 minutes
03
--- Not Used ---
04
Number of
Networks
0: Single
1: Divide Same
Network
0
The number of networks to
manage.
With a single network, select
Single.
When dividing and managing the
same network as multiple
networks, select Divide.