NEC ELECTRA ELITE IPK II - Location Setup

Document Revision 1 Electra Elite IPK II
2 - 4 Program 10 : System Configuration Setup
Description
Use Program 10-02 : Location Setup to define the location of the installed system.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-02 : Location Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01 Country Code Dial (up to 4 digits)
0~9,
, , #
1 Enter the country code.
02 International
Access Code
Dial (up to 4 digits)
0~9,
, , #
- Enter the international access
code.
03 Other Area
Access Code
Dial (up to 2 digits)
0~9,
, , #
9 Enter the other area access code
04 Area Code Dial (up to 6 digits)
0~9,
, , #
- Enter the local area code.
05 Trunk Access
Code
Dial (up to 8 digits):
0~9, #,
,
- Enter the trunk access code digits
required to place an outgoing call.
This is the code which will be
added to the Caller ID information
for incoming trunk calls to allow
the call to dial out if allowed in
20-19-03.
IMPORTANT
Program 10-02-05 is only
supported by telephone
programming. PCPro and WebPro
cannot edit this option.