NEC ELECTRA ELITE IPK II - CPUII Hardware Setup

Document Revision 1 Electra Elite IPK II
2 - 26 Program 10 : System Configuration Setup
Description
Use Program 10-21 : CPUII Hardware Setup to set up various hardware, such as
the baud rate of COM port and the switch for control on CPUII.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-21 : CPUII Hardware Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default Description
01
--- Not Used ---
02
Baud rate for
COM Port
0 = 4800bps
1 = 9600bps
2 = 19200bps
3 = 38400bps
4 = 56000bps (set in PCPro only)
5 = 115200bps (set in PCPro only
2 Define the baud
rate for COM 1.
03
--- Not Used ---