NEC ELECTRA ELITE IPK II - Trunk Ring Tone Range; Table 2-6 Program 22: 03 - Incoming Signal Frequency Patterns

Document Revision 1 Electra Elite IPK II
2 - 228 Program 22 : Incoming Call Setup
Description
Use Program 22-03 : Trunk Ring Tone Range to select the ring tone range for the
trunk. The trunk uses a ring tone within the range selected when it rings an extension.
There are eight ring tones available. Customize the Trunk Ring Tones in Program
82-01.
Program 22 : Incoming Call Setup
22-03 : Trunk Ring Tone Range
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Ring Tone Pattern Default Description
Related
Program
01 0~8
(Ring Tone Pattern 1~4)
(Melody 1~ Melody 5)
0
Use this program to select the ring tone
range for the trunk. The trunk uses a
ring tone within the range selected when
it rings an extension. There are eight
ring tones available.
15-02
Table 2-6 Program 22 : 03 – Incoming Signal Frequency Patterns
Incoming Signal
Frequency Pattern
Type Frequency 1 Frequency 2 Modulation
Pattern 1 High
Middle
Low
1100
660
520
1400
760
660
16Hz
16Hz
16Hz
Pattern 2 High
Middle
Low
1100
660
520
1400
760
660
8Hz
8Hz
8Hz
Pattern 3 High
Middle
Low
1100
660
520
1100
660
520
Envelope
Envelope
Envelope
Pattern 4 High
Middle
Low
1100
660
520
1100
660
520
No modulation
No modulation
No modulation