NEC ELECTRA ELITE IPK II - Trunk Group Routing for DISA

Document Revision 1 Electra Elite IPK II
2 - 276 Program 25 : DID/DISA Setup
Description
Use Program 25-10 : Trunk Group Routing for DISA to assign the Trunk Group
route chosen when a user places a DISA call into the system and dials 9. Set Trunk
Group Routing in Program 14-06. Enable or disable the DISA caller’s ability to dial 9
in Program 20-14-02. You assign a route to each DISA Class of Service (1-15). The
system assigns a DISA Class of Service to a call based on the password the DISA
caller dials.
When programming, you make a separate entry for each Night Service Mode.
Conditions
None
Feature Cross Reference
J Direct Inward System Access (DISA)
Program 25 : DID/DISA Setup
25-10 : Trunk Group Routing for DISA
Level:
IN
Input Data
DISA User Number 1~15
Item
No.
Day/Night
Mode
Route Table
Number
Default
01 1~8 0~100
(0 = No Setting)
1