NEC ELECTRA ELITE IPK II - Individual Trunk Group Routing for Extensions

Electra Elite IPK II Document Revision 1
Electra Elite IPK II Programming Manual 2 - 221
Description
Use Program 21-15 : Individual Trunk Group Route for Extensions to designate
the alternate trunk access route accessed when a user dials the Alternate Trunk
Route Access Code. Refer to Program 11-09-02 : Alternate Trunk Access Code when
setting up alternate trunk codes. Refer to 14-06 : Trunk Group Routing to set up the
trunk routes. When entering data for this option, enter the route number or “0” to
prevent routing.
Conditions
None
Feature Cross Reference
J Central Office Calls, Placing
Program 21 : Outgoing Call Setup
21-15 : Individual Trunk Group Routing for Extensions
Level:
IN
Input Data
Extension Number Maximum 8 digits
Item
No.
Day/Night
Mode
Route Table
Number
Default
01 1~8 0~100
(0 = No Setting)
0